@article { author = {Akbari, Mahmoud and Nozarian Arani, Mohammad Hossein and Panahi Shahri, Omid}, title = {Optimal Design of Three Dimensional Flexural Frames with Using Genetic Algorithm}, journal = {New Approaches in Civil Engineering}, volume = {3}, number = {3}, pages = {30-45}, year = {2019}, publisher = {Papyrus Press}, issn = {2588-7122}, eissn = {2588-7122}, doi = {10.30469/jnace.2019.103068}, abstract = {Main goal of present study is optimal design of three dimensional flexural frame with using genetic algorithm. Genetic algorithm, it is an evolutionary algorithm based on intelligent search and it is highly efficient in discrete decision making. Also, in this respect, it may be appropriate to optimize the steel frames with the available profiles in the market. In terms of control design restraint, OpenSees software for determining response of structure was used. In continue, OpenSees results with genetic algorithm connected with using Matlab software. Design methodology in this research is LRFD. Also, in present study three dimensional frame including a frame with six stories, two frames with 10 stories under gravity, seismic and wind loads have been expanded. In optimal processing, frames with and without construction restraint analyzed and both of results have been proposed. Results of present study showed that optimal model have high applicable in proposing optimal design.  }, keywords = {optimization,Genetic Algorithm,Flexural steel frame,LRFD method,Structure Design}, title_fa = {طراحی بهینه قاب‌های فولادی خمشی سه بعدی با الگوریتم ژنتیک}, abstract_fa = {هدف از این مطالعه طراحی بهینه قاب های فولادی خمشی سه بعدی با استفاده از الگوریتم ژنتیک است. الگوریتم ژنتیک، یک الگوریتم تکاملی و مبتنی بر جستجوی هوشمندانه است که در مسائل تصمیم گیری گسسته، کارایی بالایی دارد و از این حیث برای بهینه سازی قاب های فولادی با پروفیلهای موجود در بازار میتواند مناسب باشد. جهت کنترل قیودات طراحی، از نرم افزار تحلیل سازه OpenSees برای تعیین پاسخ سازه استفاده میشود که به نحو مناسبی این نرم افزار با کد الگوریتم ژنتیک تهیه شده در نرم افزار MATLAB مرتبط می شود. روش طراحی در این مطالعه روش ضرایب بار و مقاومت (LRFD) است. در این مطالعه، مدلهای طراحی بهینه سه قاب سه بعدی شامل یک قاب شش طبقه و دو قاب ده طبقه تحت بارگذاری بار ثقلی، بار زلزله و بار باد توسعه داده می­شود و نتایج آن ارائه می گردد. در فرآیند بهینه سازی، قاب ها با قیود اجرایی و بدون قیود اجرایی مورد بررسی قرار گرفته اند و نتایج هر دو حالت ارائه می شود. نتایج نشان می دهد که مدل بهینه سازی از کارایی بالایی در ارائه طرح های بهینه برخوردار است.}, keywords_fa = {بهینه سازی,الگوریتم ژنتیک,قاب فولادی خمشی,روش ضرایب بار و مقاومت,طراحی سازه}, url = {https://www.jnace.ir/article_103068.html}, eprint = {https://www.jnace.ir/article_103068_45942a5375a9b2ad19812b5ed7a0d2d5.pdf} }