ORIGINAL_ARTICLE
بررسی رفتار لرزه ای دیوار برشی فولادی کوپل با تغییرات ابعاد بازشو با در نظرگرفتن سطوح عملکرد
دیوار برشی فولادی کوپل به دلیل تامین فضاهای بزرگ برای ایجاد کاربریهای گوناگون در طبقات و ملاحظات معماری از قبیل درها، پنجرهها و راهروها مورد توجه طراحان قرار گرفته است. در این تحقیق، به بررسی اثر زلزلههای نزدیک و دور از گسل بر روی دو مجموعه قاب با سیستم دیوار برشی فولادی کوپل میان مرتبه پرداخته شده است. در هر دو مجموعه، سازهی دیوار برشی فولادی کوپل 8 طبقه با تغییرات ابعاد بازشو یکی به طول 1 متر و دیگری به طول 2 متر و عرض 0.6 متر و 0.9 متر (مجموعا تعداد 4 قاب) با منظمی در پلان در نظر گرفته شده است. سازهها به صورت سه بعدی در نرمافزار ETABS طراحی و سپس قاب دو بعدی کناری در نرمافزار OpenSees تحلیل غیرخطی شدهاند. در این تحقیق، از تحلیلهای استاتیکی غیرخطی بارافزون و دینامیکی غیرخطی تاریخچه زمانی استفاده شده است. در تحلیلهای استاتیکی غیرخطی بارافزون، برش پایه در برابر جابجایی لحاظ گردیده و در تحلیلهای دینامیکی غیرخطی تاریخچه زمانی، مقادیر تغییرمکان نسبی، مطلق، برش وارد بر طبقات و برش پایه بررسی شده است. نتایج حاصله از تحلیلهای غیرخطی گویای این مطلب است که با افزایش ابعاد بازشوها، میزان تغییرمکان نسبی و مطلق طبقات افزایش و همچنین با کاهش ابعاد بازشوها میزان برش وارد بر طبقات و برش پایه کاهش مییابد که این مسئله نشانگر تاثیر زیاد ابعاد بازشوها بر رفتار لرزهای دیوار برشی فولادی کوپل با در نظرگیری سطوح عملکرد قاب میباشد.
https://www.jnace.ir/article_147824_1c12968c633bc2b88e4c279333b4e695.pdf
2021-11-22
1
22
10.30469/jnace.2021.147824
دیوار برشی فولادی کوپل
تغییرات ابعاد بازشو
تحلیل استاتیکی غیرخطی بارافزون
تحلیل دینامیکی غیرخطی تاریخچه زمانی
سطوح عملکرد
حمید
صابری
saberi.hamid@gmail.com
1
استادیار، گروه مهندسی عمران، دانشگاه غیر انتفاعی ایوانکی، سمنان، ایران
AUTHOR
وحید
صابری
saberi.vahid@gmail.com
2
استادیار دانشکده عمران دانشگاه ایوانکی، سمنان، ایران
LEAD_AUTHOR
مائده
زاهد
civilzahed@gmail.com
3
کارشناس ارشد، گروه مهندسی عمران، دانشگاه غیرانتفاعی ایوانکی، سمنان، ایران
AUTHOR
عباسعلی
صادقی
sss1991b@gmail.com
4
گروه عمران، دانشکده مهندسی، واحد مشهد، دانشگاه آزاد اسلامی، مشهد، ایران
AUTHOR
[1]-Gholhaki, M., Ghadaksaz, M., 2017, Investigation of Operation of Link Beam Length in Nonlinear Dynamic Analysis of Steel Plate Shear Walls with Coupling with Rigid Joint, Ferdowsi Civil Engineering, 30(2), 19-32. (In Persian).
1
[2]-Poursha, M., Khoshnoudian, F., Moghadam, AS., 2009, A consecutive modal pushover procedure for estimating the seismic demands of tall buildings, Engineering Structures, 31, 591–599.
2
[3]- Roberts, T. M., Sabouri-Ghomi, S., 1992, Hysteretic characteristics of unsti ened perforated steel plate shear panels, Thin-Walled Structure, 14(2), 139-151.
3
[4]- Driver, R. G., Kulak, G. L., Kennedy, D. J. L., and Elwi, A. E., 1998, Cyclic Test of Four-Story Steel Plate Shear Wall, Journal of Structural Engineering, 124, 112-120.
4
[5]- Harries, K. A., Moulton, J. D., and Clemson, R. L., 2004, Parametric study of coupled wall behavior – implications for the design of coupling beams, Journal of Structural Engineering, 130, 480-488.
5
[6]- Canbolat, B. A., Parra-Montesinos, G. J., and Wight, J. K., 2005, Experimental study on the seismic behavior of highperformance fiber reinforced cement composite coupling beams, Structural Journal, 102(1), 159-166.
6
[7]-Qu, B., and Bruneau, M., 2009, Design of steel plate shear walls considering boundary frame moment resisting action, Journal of Structural Engineering, 135(12), 1511-1521.
7
[8]- Sabouri-Ghomi, S., Ahouri, E., Sajadi, R., Alavi, M., Roufegarinejad, A. and Bradford, M. A., 2012, Stiffness and strength degradation of steel shear walls having an arbitrarily-located opening, Journal of Constructional Steel Research, 79, 91-100. (In Persian).
8
[9]- Hatami, S., and Gholikhani, M., 2015, Lateral behavior of cold-formed steel framed shear walls with steel sheet sheathing using FE method, Journal of Modeling in Engineering, 13(40), 129-150. (In Persian).
9
[10]- Gholhaki, M., and Ghadaksaz, M. B., 2016, Investigation of the link beam length of a coupled steel plate shear wall, Steel and Composite Structures, 20 (1), 107 –125.
10
[11]- Shayanfar, M., Raissi Dehkordi, A., Rezaeian, A., and Gohrrokhi, A., 2017, Evaluation of steel plate shear walls based on performance based plastic design. Journal of Modeling in Engineering, 15(51), 381-396. (In Persian).
11
[12]- Pavir, A., and Shekastehband, B., 2017, Hysteretic behavior of coupled steel plate shear walls, Journal of Constructional Steel Research, 133, 19–35.
12
[13]- Gorji, M., and Cheng, R., 2018, Plastic analysis and performance-based design of coupled steel plate shear walls, Engineering Structures, 166, 472–484.
13
[14]-Sharbatdar, M., and Khosroabadi, M., 2018, Investigation of Design Codes Reliability for Seismic Design of Steel Plate Shear Walls Consisting of Several Parameters, Journal of Modeling in Engineering, 16(52), 277-297. (In Persian).
14
[15]-Hatami, F., and Paslar, N., 2019, Investigating the Opening Dimensions, the Stiffness of the Boundary Elements and the Type of the Infill Plate on the Behavior of Steel Plate Shear Wall, Amirkabir Journal of Civil Engineering, 52(2), 12-21. (In Persian).
15
[16]- Khizab, B., Sadeghi, A., Hashemi, S., Mehdizadeh, K., and Nasseri, H., 2020, Investigation the performance of Dual Systems Moment-Resisting Frame with Steel Plate Shear Wall Subjected to Blast Loading, Journal of Structural and Construction Engineering, (In Persian).
16
[17]- Habibullah, A., 2015, ETABS-Three Dimensional Analysis of Building Systems, Manual. Computers and Structures Inc. Berkeley, California.
17
[18]- Mazzoni, S., Mckenna, F., Scott, M. H. and Fenves, G. L., 2006, OpenSees Command Language Manual, http://OpenSEES. Berkeley.edu/OPENSEES/manuals/user manual/OpenSees Command Language Manual June 2006.pdf.
18
[19]- Saberi, V., Saberi, H., and Sadeghi, A., 2020, Collapse Assessment of Steel Moment Frames Based on Development of Plastic Hinges, Amirkabir Journal of Civil Engineering, (In Persian).
19
[20]-Sadeghi, A., Hashemi, S., and Mehdizadeh, K., 2020, Probabilistic Assessment of Seismic Collapse Capacity of 3D Steel Moment-Resisting Frame Structures, Journal of Structural and Construction Engineering, (In Persian).
20
[21]- Mehdizadeh, K., Karamodin, A., and Sadeghi A., 2020, Progressive Sidesway Collapse Analysis of Steel Moment-Resisting Frames under Earthquake Excitations, Iranian Journal of Science and Technology Transaction of Civil Engineering, 44, 1209–1221.
21
[22]- FEMA P 695, 2009, Quantification of Building Seismic Performance Factors. Washington, D.C. Federal Emergency Management Agency, USA.
22
[23]- Saberi, H., Saberi, V., Bayat-Sarmadi, H., and Sadeghi, A., 2021, Investigation the Arrangement Variation of Viscous Dampers in Tall Steel Structure under Near and Far-Field Earthquakes, New Approaches in Civil Engineering, 5(1), 20-42.
23
[24]- Saberi, V., Saberi, H., Seraji, M., and Sadeghi, A., 2021, Determining the Optimal Length of Link Beam in Eccentric Braced Frames under Near and Far-fault Earthquakes, New Approaches in Civil Engineering, 4(4), 78-97.
24
[25]-Sadeghi, A., Hashemi, S., and Mehdizadeh, K., 2020, The Performance Investigation of Deformation and Energy Parameters in Seismic Damage Assessment of Steel Structures, New Approaches in Civil Engineering, 3(4), 1-23.
25
[26]- Sadeghi, A., Pouraminian, M., Hashemi, S., and Pourbakhshian, S., 2021, Comparison of Seismic Performance of Structural Systems Moment Frame, Concentric Braced Frame and Buckling Restrained Braced Frame Using Damage Index, New Approaches in Civil Engineering, 5(1), 1-19.
26
[27]- Saberi, H., Saberi, V., Vali, F., Farajpour, N., Sadati, Z., Razgordani, M., and Sadeghi, A., 2021, Investigation the Accuracy of Static Analysis Method in Comparison with Spectral Dynamic and Time History Analyses in Steel Structures with Mass Irregularity, New Approaches in Civil Engineering, 5(1), 43-56.
27
[28]-Next Generation Attenuation of Ground Motion (Nga) Project.(2006). http://Peer. Berkeley. Edu\nga\(Accessed 10 October 2006).
28
[29]-Baker, J. W., 2007, Plots of Indented Velocity Pulses, Department of Civil and Environmental Engineering. Stanford University, Stanford, CA 94305, USA.
29
[30]- BHRC, 2014, Iranian code of practice for seismic resistant design of buildings, Tehran: Building and Housing Research Centre, Standard No. 2800. (In Persian).
30
[31]- INBC, 2013, Design and Construction of Steel Structures, Tehran: Ministry of Housing and Urban Development, Iranian National Building Code, Part 10. (In Persian).
31
[32]- INBC, 2013, Design Loads for Buildings, Tehran: Ministry of Housing and Urban Development, Iranian National Building Code, Part 6. (In Persian).
32
[33]- ASCE 7., 2016, Minimum design loads for buildings and other structures, New York: American Society of Civil Engineers.
33
[34]- Kim, J., Park, J., and Lee, T., 2011, Sensitivity analysis of steel buildings subjected to column loss, Engineering Structures, 33(2), 421-432.
34
[35]- Sadeghi, A., Kazemi, H., and Samadi, M., 2022, The Probabilistic Analysis of Steel Moment-Resisting Frame Structures Performance under Vehicles Impact, Amirkabir Journal of Civil Engineering, 53(12), 16-16.
35
[36]- Li, C. H., Tsai, K. C., and Chang, J, T., 2011, Cyclic Test of a Coupled Steel Plate Shear Wall Substructure, The Twelfth East Asia-Pacific Conference on Structural Engineering and Construction.
36
[37]- FEMA 356., 2000, Pre-Standard and Commentary for the seismic Rehabilitation of Buildings, Washington D.C. Federal Emergency Management Agency, USA.
37
[38]- Commentary of Instruction for seismic Rehabilitation of Existing Buildings NO: 360.
38
ORIGINAL_ARTICLE
مقایسه عملکرد سیستم های مقاوم سازه ای مختلف در قابهای بتنی کوتاه مرتبه و میان مرتبه
در این پژوهش قصد داریم با آنالیز استاتیکی غیر خطی، عملکرد سیستمهای مقاوم باربر جانبی قابهای بتن مسلح در انواع ساختمانهای کوتاه مرتبه و میان مرتبه بررسی و مقایسه گردد. همچنین بررسی شود که انتخاب نوع سیستمهای جانبی چه تاثیری در عملکرد ساختمانها دارد. و در نهایت بهترین سیستم از لحاظ دو مولفه اقتصادی بودن و رفتار لرزهای بهتر در آنها انتخاب گردد. به همین منظور تحلیل و طراحی تعداد 24 مدل با استفاده از نرم افزار ETABS صورت گرفته که به صورت منظم و دوبعدی مدلسازی شده اند. دهانه قاب ها سه یا پنج دهانه فرض شده که هرکدام پنج متر طول دارند. قاب ها در حالات سه و شش طبقه مورد بررسی قرار گرفته اند که در همگی آنها ارتفاع طبقات سه متر لحاظ شده است. در سازه های سه طبقه، سازه قاب خمشی ویژه و دیوار برشی ویژه بهترین انتخاب می باشد. در سازه های شش طبقه، سازه قاب خمشی ویژه به همراه دیوار برشی ویژه بهترین انتخاب می باشد.
https://www.jnace.ir/article_147825_1b4ff23fac47d59a622fa6fd77e3685f.pdf
2021-11-22
23
37
10.30469/jnace.2021.147825
قاب بتنی
بار جانبی
آنالیز استاتیکی غیر خطی
ساختمان کوتاه مرتبه و میان مرتبه
سجاد
محمدیان آبی
sajjadmohammadian90@yahoo.com
1
گروه مهندسی عمران-سازه، دانشکده عمران، دانشگاه آزاد اسلامی واحد علوم و تحقیقات تهران، تهران، ایران
LEAD_AUTHOR
صمد
سهرابی
sajjadmohammadian90@gmail.com
2
کارشناس ارشد مهندسی سازه، دانشکده فنی مهندسی، دانشگاه آزاد اسلامی واحد ملایر
AUTHOR
[1]-Azzam, K., and Rana, K., 2012, Optimization in the selection of structures systems.for the design of reinforced concrete high-rise uildings in resisting seismicforces, McGraw, Hill.
1
[2]- کاظمی نیاکرانی، ح.، خوشنودیان، ف.، 1389، رفتار لرزه ای سازه های بلند و روشهای حل مشکل تأخیر برشی در این سازه ها، پنجمین کنگره ملی مهندسی عمران.
2
[3]- صفاری، ح.، رهگذر، ر.، محجوب، ر.،1396، تحلیل تقریبی سازه های بلند مقاوم شده با قاب محیطی در مقابل نیروهای جانبی، بخش مهندسی دانشگاه باهنر کرمان.
3
[4]-آرامش، س.، 1391، مطالعه رفتار لرزه ای انواع سیستم های مقاوم سازه ای در ساختمان های بلند مرتبه بتن آرمه، دانشگاه سمنان، اولین کنفرانس ملی صنعت بتن.
4
[5]- خیرالدین، ع.، جمشیدی، ح.، 1390، مقایسه سیستم های لوله ای در ساختمانهای بلند بتن آرمه، دانشکده مهندسی عمران دانشگاه سمنان.
5
[6]- صدر نفیسی، س.، 1397، نقش سیستمهای مختلف مهار بندی در مقاوم سازی سازه های فولادی، دانشگاه صنعتی خواجه نصیر، شرکت مهندسین مشاور چگالش .
6
[7]- رازانی، ر.، جعفری مود، غ.، 1398، بررسی رفتار قابهای فولادی خمشی، دوگانه و خورجینی با طرح بهینه شده در محیطهای خطی و غیرخطی تحت اثر زلزله، دانشگاه شیراز .
7
[8]- حسینی هاشمی، ب.، پروری، ع.، 1389، مقایسه عملکرد سازه قاب خمشی ویژه با سازه قاب خمشی معمولی فولادی طراحی شده با ویرایش سوم استاندارد 2800، پنجمین کنگره ملی مهندسی عمران.
8
[9]- احمدی روحانی، م.، 1377، بهینه یابی موقعیت دیوارهای برشی در سازه های بلند، پایان نامه کارشناسی ارشد، دانشگاه آزاد اسلامی واحد کرمان.
9
[10]-ابوالبشری، م. م.، 1382، مبانی بهینه سازی سازه ها، انتشارات دانشگاه فردوسی مشهد.
10
[11]- مبحث ششم مقررات ملی ساختمان، بارهای وارد بر ساختمان، ویرایش سوم 1392
11
[12]- مبحث نهم مقررات ملی ساختمان ، طرح و اجرای ساختمانهای بتن آرمه، ویرایش چهارم 1392
12
[13]- آئین نامه 2800، طراحی ساختمانها در برابر زلزله، ویرایش چهارم1384
13
[14]-آئین نامه بتن ایران(آبا)، معاونت امور فنی، دفتر امور فنی، تدوین معیارها و کاهش خطرپذیری ناشی از زلزله، چاپ هفتم 1383
14
[15]- سازمان مدیریت و برنامه ریزی کشور،1385، دستورالعمل بهسازی لرزه ای ساختمان ها ی موجود نشریه شماره 360، دفتر امور فنی و تدوین معیارها و کاهش خطرپذیری ناشی از زلزله.
15
[16]-http://peer.berkeley.edu/nga/search.html
16
ORIGINAL_ARTICLE
بررسی رفتار دیوار برشی فولادی تقویت شده با SMA برای ایجاد حرکت گهوارهای
آلیاژهای حافظه دارشکلی به علت دارا بودن رفتارهای ویژه مانند رفتار سوپرالاستیک (بازیابی کامل کرنش حین بارگذاری و باربرداری به شکل یک منحنی هیسترزیس) و رفتار حافظه داری (بازیابی کرنش در حین حرارت دادن در اثر استحاله فازی از فاز پایدار در دمای پایین به فاز پایدار در دمای بالا) در دهه اخیر مورد توجه محققین قرا گرفته است. این مواد علاوه بر رفتارهای فوق الذکر دارای خصوصیات مناسب دیگری نیز مانند مقاومت بالا در برابر خستگی و خوردگی، پایداری رفتارتنش-کرنش و قابلیت استهلاک انرژی میباشند. یکی از راهکارهای هدایت آسیب در سازه و کاهش نیازهای لرزهای در آن بکارگیری سیستم های گهوارهای است. در این سیستمها حرکت نسبی عمدتا بین پای ستونها و پی متناظر آنها رخ میدهد که در آن مکانها، جاذبهای انرژی انجام میگیرند. در حرکت گهوارهای بدنه سازه در حد الاستیک تغییرشکل داده و تقریبا به صورت جسم صلب حرکت مینماید و پس از زلزله وزن ساختمان سبب میشود که سازه به محل اولیه خود بازگردد.
https://www.jnace.ir/article_147826_d0a5599d726240eca8199c0099085fc4.pdf
2021-11-22
38
54
10.30469/jnace.2021.147826
آلیاژهای حافظه دار شکلی
رفتار حافظه داری
سیستم گهوارهای
دیوار برشی فولادی
لیلا
حسین زاده
l.hosseinzadeh@iaut.ac.ir
1
استادیار، گروه مهندسی عمران، واحد تبریز، دانشگاه آزاد اسلامی، تبریز، ایران
LEAD_AUTHOR
محمد
افشاری
stu.afshaari@iaut.ac.ir
2
کارشناس ارشد، گروه مهندسی عمران، واحد تبریز، دانشگاه آزاد اسلامی، تبریز، ایران
AUTHOR
[1]- Song, G., Ma, N., and Li, H. N., 2006, Applications of shape memory alloys in civil structures, Engineering structures, 28(9), 1266-1274.
1
[2]- Berman, J.W, and Bruneau, M.Capacity, 2010, Design of Vertical Boundary Elements in Steel Plate Shear Walls, Engineering structures, 30(6), 1143-1152.
2
[3] - شکوری قانع، ح.، 1395، مطالعه تحلیلی و آزمایشگاهی کنترل کمانش فشاری به کمک فلزات هوشمند، تحت بارهای رفت و برگشتی (پایاننامه کارشناسی ارشد). دانشگاه علم و فرهنگ تهران، تهران. 148-1.
3
[4]- Auricchio, F., Fugazza, D., and Desroches, R., 2006, Earthquake performance of steel frames with nitinol braces, Journal of Earthquake Engineering, 10(spec01), 45-66.
4
[5]- McCormick, J., DesRoches, R., Fugazza, D., and Auricchio, F., 2007, Seismic assessment of concentrically braced steel frames with shape memory alloy braces, Journal of Structural Engineering, 133(6), 862-870.
5
[6]-Asgarian, B., and Moradi, S., 2011, Seismic response of steel braced frames with shape memory alloy braces, Journal of Constructional Steel Research, 67(1), 65-74.
6
[7]- Miller, D. J., Fahnestock, L. A., and Eatherton, M. R., 2012, Development and experimental validation of a nickeltitanium shape memory alloy self-centering buckling-restrained brace, Engineering Structures, 40, 288-298.
7
[8]- Hooshmand, M., Rafezy, B., and Khalil-Allafi, J., 2015, Seismic retrofit in building structures using shape memory alloys, KSCE Journal of Civil Engineering, 19(4), 935-942.
8
[9]- Amadio, C., Fragiacomo, M., and Rajgelj, S., 2003, The effects of repeated earthquake ground motions on the non-linear response of SDOF systems, Earthquake engineering & structural dynamics, 32(2), 291-308.
9
[10]-Astaneh-Asl, 1998, A. Experimental and Analytical Studies of Composit Shear Walls. S.l.: Research Project, Department of Civil Engineering, University of California, Berkeley,
10
[11]-Sabelli, R., and Bruneau, M., 2007, Steel Design Guide No.20: Steel Plate Shear Walls. S.l., American Institute of Steel Construction, Inc.
11
[12]-Ocel, J., DesRoches, R., Leon, R. T., Hess, W. G., Krumme, R., and Hayes, J. R., 2004, Steel beamcolumn connections using shape memory alloys, Structural Engineering, 130(5),732-740
12
[13]- Song, G. and Ma, N., 2006, Applications of shape memory alloys in civil structures, Engineering Structures, (28), 1266–1274.
13
[14]-Inaudi, J., and Kelly, J., 1994, Experiments on Tuned Mass Dampers Using Viscoelastic, Frictional and Shape-Memory Alloy Materials, First World Conference on Structural Control, Los Angeles, pp. 127–136.
14
[15]-Meng, W., and Yongjiu, Shi, 2015, Experimental and numerical study of unstiffened steel plate shear wall structures, Journal of Constructional Steel Research, 112, 373–386.
15
ORIGINAL_ARTICLE
کنترل کیفیت مصالح الاستومری نئوپرن
الاستومر، پلیمری است که قابلیت ویسکوالاستیسیته (گران روی و کشسانی باهم) بالایی دارد. ضریب پواسون آن ها به 5/0 بسیار نزدیک است و بنابراین می توان آنها را تراکمناپذیر فرض کرد. قبل از تولید هر محصول الاستومری، کارشناسان اقدام به شناسایی محل نصب و به عبارتی شرایط مکانی که قرار است محصول تولیدی مورد استفاده و بهرهبرداری قرار گیرد، میکنند. شناسایی عواملی از جمله اسیدی بودن محل، احتمال وجود روغن و تماس با آب دریا و یا هر مورد دیگری که در بهرهبرداری محصول نهایی تاثیرگذار باشد. در مواردی نئوپرنها یا دیگر قطعات پلاستیکی از جمله فندرها باید مورد ارزیابیهایی از جمله واکنشهای در تماس با آب دریا قرار گیرند. حال با توجه به شناخت محیط و کاربری محصول، فرمولاسیون مناسب آن در آزمایشگاه کارخانه طراحی شده و مورد تستهای اولیه قرار میگیرد.سنجش میزان رئومتری، تستهای کششی، پارگی، سختی مانایی فشارپیرسازی و سایش، دیگر آزمونهای بررسی شده در این پژوهش میباشند. از جمله موارد دیگری که باید به آن توجه کرد سیستم پخت لاستیک میباشد، که به این منظور سیستمهای پخت گوگردی و پراکسیدی موجود میباشند که نمونههای موردی مد نظر این پژوهش از سیستمهای پخت گوگردی استفاده میشود. باید توجه کرد تا سیستم پخت به لاستیک اعمال نشود، لاستیک هیچ شکلی نمیگیرد، زیرا پیوندهای گوگردی یا پراکسیدی باید تشکیل شوند تا لاستیک از حالت آمرفی (Amorphous) خارج شده و به خود شکل بگیرد.
https://www.jnace.ir/article_147827_aab78456cc70276f8067abcc8c7f391e.pdf
2021-11-22
55
67
10.30469/jnace.2021.147827
الاستومر
رئومتری
کشش
پارگی
مانایی
پیرسازی
سامان
سنجری
civilresearch.sanjari@gmail.com
1
کارشناس ارشد، مدیر پروژه
AUTHOR
حسین
سیدی مرغکی
hosyseyedi@gmail.com
2
کارشناس ارشد، واحد تحقیق و توسعه
LEAD_AUTHOR
حسین
راهنمایی
rahnama1596@gmail.com
3
کارشناس ارشد، سرپرست تحقیق و توسعه
AUTHOR
[1]- Black, J. T., and Kohser, R. A., 2019, DeGarmo’s Materials and Processes in Manufacturing, 13th Edition.
1
[2]- American Society for Testing and Materials (ASTM D)
2
[3]- International Standard ISO 22762-1:2010
3
[4]- AASHTO LRFD Bridge Design Specifications, Customary U.S. Units, 7th edition
4
[5]- European Standard EN 1337-3:2005
5
[6]- http://WWW.Kohranggroup.com
6
ORIGINAL_ARTICLE
ارزیابی منابع آب زیرزمینی جنوب غرب قوچان(استان خراسان رضوی) جهت مصارف آشامیدن و صنعتی براساس شاخص های کیفی
منطقه مورد مطالعه در شمال شرق ایران، استان خراسان رضوی واقع است. این پژوهش به ارزیابی منابع آب زیرزمینی محدوده مطالعاتی براساس شاخص های کیفی در سال 99 پرداخت. با توجه به نوع سازندهای زمین شناسی، آبدهی و موقعیت منابع آبی منطقه، 10 منبع آب زیرزمینی جهت آنالیز و ارزیابی کیفی مورد تحلیل قرارگرفت. پارامترهای فیزیکی از قبیل PH، هدایت الکتریکی(EC) و مواد جامد محلول(TDS) در محل نمونه برداری توسط مولتی متر اندازه گیری شد. آنالیز هیدروژئوشیمیایی داده ها در آزمایشگاه به روش پلاسمای القایی صورت گرفت بررسی آنالیزهای شیمیایی آبهای وارده به آبخوان منطقه مورد مطالعه و استفاده از شاخص های کیفی آب از لحاظ شرب و صنعت نشان داد که منابع تامین کننده یون های وارده به منطقه جنوب قوچان متاثر از لیتولوژی و رسوباتی است که در معرض هوازدگی به مدت طولانی قرار داشتند، طوری که آبهای دشت در برخی منابع به دلیل عبور از سازندهای تبخیری – آواری دوران سوم (تشکیلات مارنی، گچی نمکی و مارنی شیلی) آنها را حل نموده و باعث افزایش نسبت Cl+So4>Hco3 شده است. شاخص های فلزی MI و PI نشان می دهد که آب زیرزمینی منطقه مورد مطالعه حاوی فلزات سنگین بوده واز لحاظ شرب مناسب نمی باشد. شاخص WQI وGQI نشان می دهد که کیفیت آب شرب منطقه ضعیف تا قابل قبول است. براساس شاخص های لانژلیه، رایزنر و پوکوریوس ، آب زیرزمینی منطقه از لحاظ صنعتی دارای خورندگی بالایی می باشد. هر دو ویژگی رسوبگذاری و خورندگی آبها می تواند پیامدهایی مانند مسدود شدن و یا تخریب لوله ها در تاسیسات و حتی اثرات منفی بر سلامت انسان را به دنبال داشته باشند.
https://www.jnace.ir/article_147833_e2845584ea6e7f3e4bbb94566fc92225.pdf
2021-11-22
68
81
10.30469/jnace.2021.147833
قوچان
کیفیت آب
شاخص فلزی
خورندگی
محمد ابراهیم
فاضل ولی پور
dr.ef.valipour@gmail.com
1
گروه زمین شناسی ، واحد مشهد، دانشگاه ازاد اسلامی، مشهد، ایران
LEAD_AUTHOR
[1]-Koponen, S., Pulliainen, J., Kallio, K, and Hallikainen, M., 2002, Lake water quality classification with airborne hyperspectral spectrometer and simulated MERIS data, Remote Sensor Environment, 79, 51-59.
1
[2]- Zhao, C., Qiao, X., Cao, Y and Shao, Q., 2017, Application of hydrogen peroxide presoaking prior to ammonia fiber expansion pretreatment of energy crops, Fuel, 205p.
2
[3]-Tajbakhshian, M., Mahmudy Gharaie, M. H., Mahboubi, A and Moussavi Harami, S. R., 2020, Study of corrosion and scaling of water resources and wastewater of Shahid Hasheminezhad Gas Refinery, Environment Water Engineering, 6(1), 13-30 [In Persian].
3
[4]- Rezaee , A., Sayyadi, M. J., and Rezaee, M., 2015, Quantitative and qualitative evaluation based on water quality indicators for drinking and agricultural use(case study of Gharehso catchment in Kermanshah province, Journal Water Resources and Development,3(1), 81-93 [In Persian].
4
[5]-Nwankwoala, H., O., and Udom, G. J., 2011, Hydrochemical facies and ionic rations of groundwater in Port Harcourt,Southern Nigeria, Research Journal of Chemical Sciences, 2011, 1(3), 87-101.
5
[6]-Nakhaei, M., Vadiati, M and Saberi, N., 2009, Hydrogeochemistry evolution of Torbate Heydariye plain, Fifteenth Meeting of Geological Society of Iran. [In Persian].
6
[7]- Dowlati, J., Lashkaripour, G. H., and Hafezi Moghadas, N., 2014, Investigating the factors affecting the Zahedan aquifer hydrogeochemistry using factor analysis, saturation indices and composite diagrams methods, Journal of Water and Soil., 28(4): 679-694 [In Persian].
7
[8]-Amini, S. H., Rezaee, A., Jafari, A., and Maleki, A., 2015, Evaluation of corrosion and scaling potential of drinking water supply sources of Marivan village Iran, Journal of Environment Health Research ,3(3), 172- 178 [In Persian].
8
[9]-Angell, P., 1999, Understanding microbially influenced corrosion as biofilm-mediated changes in surface chemistry, Current opinion in Biotechnology.10(3), 269-273.
9
[10]-Dietrich, A. M., Glindemann, D., Pizarro, F., Gidi, V., Olivares, M., Araya, M and Younos, T., 2004, Health and aesthetic impacts of copper corrosion on drinking water, Water sciences and Technology, 49(2), 55-62.
10
[11]- Hoseinzadeh, E., Y usefzadeh, A., Rahimi, N and Khorsandi, H., 2013, Evaluation of corrosion and scaling potential of a water treatment plant, Archives of Hygiene Sciences ,2(2), 41-47, [In Persian].
11
[12]-Farlry, M., and Trow, S., 2016, Losses in water distribution networks: A practitioner, guide to assessment, monitoring and control. London,UK: IWA Publishing.
12
[13]-Tamasi, Cini., 2004, Heavy metals in drinking waters from mount amitata (Tuscany.Italy), Possible risks from arsenic for public health in the province of Siena, Science of the Total Environment, 327, 41-51.
13
[14]-Mohan, C., Gupta, T., Shetty, H and Menon, N., 1986, Toxicity of cadmium to six intertidal invertebrates, Fish Tech, 21, 1-5.
14
[15]-Bably, P., Kumara, P and Bano, S., 2011, Groundwater quality evaluation near mining area and development of heavy metal pollution index, App1ication Water Science.
15
[16]-Han, G. and Liu, C. Q., 2004, Water geochemistry controlled by carbonate dissolution: a study of the river waters draining Karst-dominated terrain, Guizhou province, China, Chemical Geology, 204, 1-21.
16
[17]-Kumar, A and Dua, A., 2009, Water quality index for assessment of water quality of river Ravi at Madhopur (India), Journal of Environmental Science, 8(1), 49-57.
17
[18]- Ketata-Rokbani, M., Gueddari, M. and Bouhlila, R., 2011, Use of geographical information system and water quality index to assess groundwater quality in EL Khir at deep aquifer (Enfidha, Tunisian Sahel) Iranica, Journal of Energy and Environment, 2(2), 133-144.
18
[19]- Jermo, C. and Pius, A., 2010, Evaluation of water quality index and its impact on the quality of life in an industrial area in Banglalore. South India, American. Journal of Scientific and industrial research, 1(3), 595-603.
19
[20]- Sahu, P., and Sikdar, P.K., 2008, Hydrochemical framework of the aquifer in and around east Kolkata Wetlads, west Bengal, India, Journal of Environment Geology, 55, 823-835.
20
[21]- Yidana, S. M., and Yidana, A., 2010, Assessing water quality using water quality index and multivariate analysis, Environmental Earth Science, 59, 1461-1573.
21
[22]-Babiker, I., Mohamed, M and Hiyama, T., 2007, Assessing groundwater quality using GIS, Water Resources Management, 21, 699-715.
22
[23]- Alexander, A. C., Ndambuki, J., Salim, R. and Manda, A., 2017, Assessment of spatial variation of groundwater quality in a mining basin, Journal of Suistainability, 9(5), 823.
23
[24]-Sedaghat, M., 2006, Earth and groundwater resources, University of Payam Noor Press. [In Persian].
24
[25]-Benson, A. S., Dietrich, A. M and Gallagher, D.L., 2012, Evaluation of iron release models for water distribution systems, Critical Reviews in Environmental Science and Technology, 42(1), 44-97.
25
[26]- Langelier, W.F., 1936, The analytical control of anticorrosion water treatment, Journal of American Water works Association, 10(28), 1500-1521.
26
[27]- Choi, J., Choi, B. G., and Hong, S., 2015, Effects of NF treated water on corrosion of pipe distribution system and its implications to blending with conventionally treated water, Desalination, 360, 138-145.
27
[28]- Gupta, N., Nafees, S. M., Jain, M. K., and Kalpana, S., 2011, Assessment of groundwater quality of outer skirts of Kota City with reference to in its potential of scale formation and corrosivity, Journal of Chemistry ,8(3), 1330-1338.
28
[29]-Alsaqqar, A.S., Khudair, B.H and Ali, S.K., 2014, evaluating water stability indices from water treatment plants in Baghdad city, Journal of Water Resource and Protection, 6(14), 1344-1351.
29
[30]-World Health Organization, 2017, Guidelines for drinking- water quality: fourth edition incorporating the first addendum, (Licence: CC BY NC-SA 3.0 IGO). Geneva.
30
[31]-Colin, M., 2006, Stress corrosion cracking, The 4th International Congress of Energy and Environmental Engineering and Management (CIIEM) Madison. 19-28.
31