Papyrus Pressرویکردهای نوین در مهندسی عمران2588-71224120200521The Post-Buckling Behavior Analysis of Frame by Elastica Methodتحلیل رفتار پس از کمانش قاب به روش الاستیکا12011791310.30469/jnace.2020.117913FAمحمدرضا رخی شهریگروه عمران، دانشکده مهندسی، واحد شاهرود، دانشگاه آزاد اسلامی، شاهرود، ایرانرضا ضیا توحیدیگروه عمران، دانشکده مهندسی، واحد مشهد، دانشگاه آزاد اسلامی، مشهد، ایرانعباسعلی صادقیگروه عمران، دانشکده مهندسی، واحد مشهد، دانشگاه آزاد اسلامی، مشهد، ایران0000-0002-3016-9080ُسیده وحیده هاشمیگروه عمران، دانشکده مهندسی، دانشگاه سیستان و بلوچستان، زاهدان، ایران0000-0002-4891-7067کوروش مهدی زادهگروه عمران،دانشکده مهندسی، واحد گرمسار، دانشگاه آزاد اسلامی، گرمسار، ایرانJournal Article20200115The elastic behavior analysis of post-buckling of the frames is complex. When a frame is exerted force over critical load, it begins large deformations. In this case, the theory of small deformations is not valid for the structure, and it must be used the theory of large deformations. Post-buckling analysis of the elastic structures always requires solving method with a set of nonlinear differential equations based on equilibrium equations. In designing the members under the axial force or the axial force and the bending moment in the structure, in addition to the yielding criterion, the buckling criterion is important too. However, if the length of the member is too much or the member is slender, before yielding, buckling occurs in the member, which requires the member to be checked for possible buckling. In this research, the post-buckling behavior of the lateral unbraced frame is analyzed with the help of Elastica theory. For this purpose, the first step is to analyses a cantilever column by the Maclaurin Series method. By examining the results of the post-buckling behavior of this column with the previous research, the verification of this method has been evaluated. In the following, due to the verification of the method, the large deformations and post-buckling behavior L-shaped frame are investigated. To analyses the frame, it is necessary to solve a nonlinear equation system. The Maclaurin Series method has been used to obtain nonlinear equations. With the help of the equations, the frame deformations diagrams have been plotted. Mathematica software is used to draw charts and solve nonlinear equations. In the following, with the modelling of the frame in Finite Element ABAQUS software, the comparison of the accuracy of the software results with this analysis has been checked and the convergence of the responses has been examined.تحلیل و بررسی رفتار الاستیک پس از کمانش قابها پیچیده است. زمانی که به یک قاب نیروی بیش از بار بحرانی وارد شود، شروع به تغییرشکلهای بزرگ میکند. در این حالت دیگر تئوری تغییرشکلهای کوچک برای سازه معتبر نیست و باید از تئوری تغییرشکلهای بزرگ استفاده گردد. تجزیهوتحلیل پس از کمانش سازههای الاستیک همواره نیازمند حل مجموعهای از معادلات دیفرانسیل غیرخطی بر اساس معادلات تعادل میباشد. در طراحی اعضای تحت نیروی محوری و یا نیروی محوری و لنگر خمشی در سازه علاوه بر معیار جاریشدگی، معیار کمانش نیز حائز اهمیت است. بهنحویکه اگر طول عضو زیاد یا عضو لاغر باشد قبل از جاریشدگی، کمانش در عضو اتفاق میافتد که لازم است عضو برای کمانش احتمالی کنترل و بررسی شود. در این تحقیق، رفتار پس از کمانش قاب مهاربندی نشده جانبی به کمک تئوری الاستیکا تحلیل و بررسی گردیده است. بدین منظور ابتدا به تحلیل یک ستون طرهای به روش بسط مکلورن پرداختهشده و با بررسی نتایج رفتار پس از کمانش آن با پژوهش گذشته، صحت روش مذکور مورد ارزیابی قرار گرفته است. در ادامه با توجه به صحت روش مذکور به بررسی تغییرشکلهای بزرگ و رفتار پس از کمانش قاب L شکل پرداختهشده است. برای تحلیل قاب مذکور نیاز به حل یک دستگاه معادلات غیرخطی میباشد. برای به دست آوردن معادلات غیرخطی از روش بسط مکلورن استفادهشده است. با بهدست آمدن معادلات، به ترسیم نمودارهای تغییرشکل قاب پرداختهشده است. برای رسم نمودارها و حل معادلات غیرخطی، نرمافزار Mathematica بهکاررفته است. در ادامه با مدلسازی قاب در نرمافزار اجزا محدودی ABAQUS ، به مقایسه صحت نتایج نرمافزار با تحلیل مذکور پرداختهشده و همگرایی پاسخها موردبررسی قرارگرفته است.Papyrus Pressرویکردهای نوین در مهندسی عمران2588-71224120200521Investigating the Efficiency of Urban Sewage Sedimentation basins with Using of Data Analysisبررسی کارایی حوضچههای رسوبگذار فاضلاب شهری با استفاده از تحلیل پوشش دادهها212911791510.30469/jnace.2020.117915FAمیلاد ارجمندگروه مهندسی آب،دانشکده عمران،دانشگاه سمنان، ایراننیما صادقیان پیرمحلهدانشگاه گیلان، رشت، ایرانسحر امینیگروه مهندسی آب، سازه های آبی، دانشگاه گیلان، گیلان، ایرانمحمد یاوریدانشگاه سمنان، سمنان، ایرانJournal Article20200106Given that in refineries typically account for about third of the total investment cost of building sedimentary ponds, increasing the efficiency of these ponds, in addition to increasing the useful life of other parts of the treatment plant, is very important economically and the environmently. The main purpose of this study is to study 16 models of urban sewage sedimentary basins and to evaluate their efficiency with the help of data analysis. Matlab software was used in this evaluation, and in the end, the average efficiency of the two methods, CCR and BCC, was calculated to have a general result. The first place went to model number two and the last place went to model number nine. Comparisons between performance ratios have been used to compare results. The correlation coefficient between CCR and BCC results is 0.754.با توجه به اینکه در تصفیه خانه ها حدود یک سوم هزینه کل سرمایه گذاری معمولا به ساخت حوضچههای رسوبگذار اختصاص داشته، افزایش بازده این حوضچه ها علاوه بر افزایش عمر مفید بخش های دیگر تصفیه خانه، از نظر اقتصادی و زیست محیطی بسیار حائز اهمیت است. هدف اصلی این تحقیق مطالعه 16 مدل حوضچههای رسوبگذار فاضلاب شهری و بررسی کارایی آنها به کمک تحلیل پوشش دادهها است. در این ارزیابی از نرم افزار Matlab کمک گرفته شده و در پایان برای داشتن نتیجه کلی، میانگین کارایی حاصل از دو روش CCR و BCC محاسبه شده است. رتبه اول به مدل شماره دو و رتبه آخر به مدل شماره نه تعلق گرفت. برای مقایسه نتایج از همبستگی بین رتبه کاراییها استفاده شده است. ضریب همبستگی بین نتایج CCR و BCC برابر 754/0 است.Papyrus Pressرویکردهای نوین در مهندسی عمران2588-71224120200521Estimation of River Flow Using Artificial Neural Networks and NeuroSolutions software: A Case Study of Zarineh Rood Miandoab Riverبرآورد دبی رودخانه با استفاده از شبکههای عصبی مصنوعی و نرمافزار NeuroSolutions: مطالعه موردی رودخانه زرینه رود میاندوآب304311791610.30469/jnace.2020.117916FAمعروف سی و سه مردهاستادیار گروه عمران، واحد ارومیه، دانشگاه آزاد اسلامی، ارومیه، ایران.علی ولی پوردانشآموخته کارشناسی ارشد گروه عمران، واحد ارومیه، دانشگاه آزاد اسلامی، ارومیه، ایران.Journal Article20200126Accurate river discharge estimation is one of the most important pillars in the management of surface water resources, especially for appropriate measures in flood situations, droughts, and drinking, agricultural and industrial applications. In this research, to estimate the discharge of the Zarrineh River, daily data and data of the Zarrineh River with a statistical period of 10 years at the site of the Sari Station of Qomish were used using the NeuroSolutions software. In this research, 60% of the data for training, 20% of data for validation and 20% for the rest were also used for testing. Various networks have been compared with multi-layered perceptron neural network (MLP), general predictor and radial base function. And the results indicate that the Multilevel Perceptron Neural Model (MLP) with the lowest mean square error was the best neural model. In this study, several networks with different transmission functions (TanhAxon, SigmoidAxon, LinearTanhAxon, and LinearSigmoidAxon) were compared. And the results indicate that the LinearTanhAxon transmission function with the lowest mean square error was the best transfer function. Also, networks with one and two hidden layers were compared and the results showed that the network with a hidden layer was better than the hidden two-layer network.برآورد دقیق دبی رودخانهها یکی از مهمترین ارکان در مدیریت منابع آبهای سطحی به ویژه جهت اتخاذ تدابیر مناسب در مواقع سیلاب، بروز خشکسالی، مصارف آشامیدنی، کشاورزی و صنعتی است. در این تحقیق جهت برآورد دبی رودخانه زرینه رود، از آمار و اطلاعات دبی روزانه رودخانه زرینه رود با طول دوره آماری 10 سال در محل ایستگاه ساری قمیش با استفاده از نرمافزار نروسولوشن استفاده شد. در این تحقیق 60 درصد دادهها برای آموزش، 20 درصد دادهها برای اعتبارسنجی و 20 درصد بقیه نیز برای تست مورد استفاده قرار گرفت. شبکههای گوناگون با مدلهای مختلف عصبی پرسپترون چندلایه ، پیشخور عمومی و تابع پایه شعاعی مورد مقایسه قرار گرفت و نتایج بیانگر آن است که مدل عصبی پرسپترون چندلایه با کمترین مقدار میانگین مربعات خطا بهترین مدل عصبی بوده است. در این تحقیق چندین شبکه با توابع انتقال مختلف (TanhAxon، SigmoidAxon، LinearTanhAxon، LinearSigmoidAxon) مورد مقایسه قرار گرفت و نتایج بیانگر آنست که تابع انتقال LinearTanhAxon با کمترین مقدار میانگین مربعات خطا بهترین تابع انتقال بوده است. همچنین شبکههای با تعداد یک و دو لایه پنهان مورد مقایسه قرار گرفت و نتایج نشان داد که شبکه با یک لایه پنهان بهتر از شبکه با دو لایه پنهان بوده است.Papyrus Pressرویکردهای نوین در مهندسی عمران2588-71224120200521Investigation of New Methods of Crack Repair in Concrete Surfacesبررسی روش های نوین ترمیم ترک در سطوح بتنی445311791710.30469/jnace.2020.117917FAوحیدرضا محسنی پورعمران،دانشکده مهندسی،دانشگاه غیر انتفاعی زند،شیراز، ایرانJournal Article20200403Due to the importance of concrete structures in today's life and the use of concrete at different levels, the repair of damaged parts of concrete surfaces, especially in the cracks section is very important. In repairing cracks, the cause of the crack must first be determined. If the crack is caused by structural factors such as subsidence, shear force, frame displacement, etc., the reasons must first be investigated and then repaired. Cracks caused by it, but if the cracks are caused by non-structural and surface factors, it is easier to fix the defects. In repairing deep cracks, it is necessary to inject appropriate restorative materials into the cracks, which requires effort and It has high accuracy. Crack repair includes steps such as cleaning the inside of the crack from debris, installing special hose heads to inject restorative materials, creating a cover layer for deep cracks, injecting restorative materials with pressure and sometimes with the help of a device, removing the cover layer and removing headgear and Finally, the final leveling of the repaired surfaces is smooth and uniform. Restorative materials can include a variety of epoxy materials, concrete adhesives, cement mortar, grout, etc. با توجه به اهمیت سازه های بتنی در زندگی امروزه و استفاده از بتن در سطوح مختلف ، ترمیم قسمت های آسیب دیده سطوح بتنی به ویژه در بخش ترک ها بسیار مهم می باشد. در ترمیم ترک ها ابتدا باید علت به وجود آمدن آن ترک مشخص گردد که اگر ترک ناشی از عوامل سازه ای همچون نشست ، نیروی برشی ، جابه جایی قاب و ... باشد ، ابتدا باید آن دلائل را بررسی نمود وپس از آن اقدام به ترمیم ترک های ناشی از آن کرد ، ولی اگر ترک ناشی از عوامل غیر سازه ای و سطحی باشد ، راحت تر می توان ایرادات را رفع نمود ، در ترمیم ترک های عمیق نیاز به تزریق مواد ترمیمی مناسب به اعماق ترک می باشد که نیاز به تلاش و دقت بالائی دارد. ترمیم ترک ها شامل مراحلی همچون پاک سازی داخل ترک از ضایعات ، نصب سر شیلنگی های مخصوص جهت تزریق مواد ترمیمی ، ایجاد لایه درپوش برای ترک های عمیق ، تزریق مواد ترمیمی با فشار و گاهی با کمک دستگاه ، برداشتن لایه درپوش و حذف سرشیلنگی ها و در آخر صاف و یکنواخت کردن نهایی سطوح ترمیم شده ، می باشد. مواد ترمیمی می تواند شامل انواع مواد اپوکسی ، چسب های بتن ، ملات سیمان ، گروت و غیره می باشد.Papyrus Pressرویکردهای نوین در مهندسی عمران2588-71224120200521Experimental and Numerical Retrofitting of Reinforced Concrete Bridge Piersمطالعه آزمایشگاهی و عددی مقاوم سازی پایه پل های بتن آرمه547011791810.30469/jnace.2020.117918FAهادی فقیه ملکیاستادیار، دانشکده مهندسی عمران، موسسه آموزش عالی آیندگان، تنکابن، ایرانمرتضی حسینی ثابتدانشجوی کارشناسی ارشد، دانشکده مهندسی عمران، موسسه آموزش عالی آیندگان، تنکابن، ایرانJournal Article20200207The use of a variety of bridge improvement and reinforcement methods has made significant progress in recent decades. Before strengthening, a study of the bridge should be done on how and in what way the useful life of the bridge can be extended. In this study, the seismic behavior of reinforced reinforced concrete columns was evaluated and compared with the distance of metal jacket and concrete jacket with dimensions of 3.5 x 3.5 m with reinforcement network. Models for estimating its seismic parameters were analyzed non-linearly geometric and materials. Use of concrete jacket box with dimensions of 3.5 x 3.5, increase energy absorption, final strength and ductility by 38, 14, 13 percent. Therefore, it can be concluded that by using a concrete jacket, the amount of items mentioned in the concrete column system can be increased.بکارگیری انواع روش های بهسازی و مقاوم سازی پل ها در چند دهه اخیر پیشرفت چشم گیری یافته است. قبل از مقاوم سازی، مطالعه برروی پل باید انجام گیرد که چگونه و با چه روشی می توان طول عمر مفید پل را افزایش داد. در این پژوهش رفتار لرزهای پایه ستون بتن آرمه تقویت شده با دورگیری ژاکت فلزی و ژاکت بتنی با ابعاد 5/3*5/3 متر دارای شبکه آرماتور مورد بررسی و مقایسه قرار گرفت. مدلهایی جهت برآورد پارامترهای لرزهای آن به صورت غیرخطی هندسی و مصالح تحلیل گردید با توجه به نتایج به دست آمده مشاهده می شود که با استفاده از دورگیری ژاکت فلزی، میزان جذب انرژی، مقاومت نهایی و شکل پذیری افزایش یافته اما کمتر از ژاکت بتنی که با استفاده از باکس ژاکت بتنی با ابعاد 5/3×5/3 میزان جذب انرژی ، مقاومت نهایی و شکل پذیری به مقدار 38 ، 14 ، 13 درصد افزایش یابد. لذا می توان نتیجه گیری کرد که با استفاده از ژاکت بتنی می توان میزان موارد ذکر شده در سیستم ستون بتنی را افزایش داد.