@article { author = {Ram, Esmaeil and Saberi, Vahid and Saberi, Hamid and Ram, Amirmohamad and Ram, Amirhossein and Sadeghi, Abbasali}, title = {Cyclic Performance Assessment of Rehabilitated Concrete Frames with Different Arrangement of FRP}, journal = {New Approaches in Civil Engineering}, volume = {4}, number = {2}, pages = {58-74}, year = {2020}, publisher = {Papyrus Press}, issn = {2588-7122}, eissn = {2588-7122}, doi = {10.30469/jnace.2020.125363}, abstract = {In this study, FRP effects on cyclic and push over behavior of locally and globally rehabilitated concrete frames were investigated. ABAQUS software used for modeling of frames. At first a 3 story-2 bay concrete building was modeled under gravity and earthquake loadings and then one of its frames was chosen as the base frame of this research. In the second step the base frame was weaken and rehabilitation carried out using three kinds of FRP named carbon, glass and aramid to compensate the lack of capacity. Strengthening of frames was done in two types of local and global manner and in each type three kinds of FRP were used. Force-displacement curve and stress-strain counter were determined for all of the models. Results showed positive effects of FRP using in rehabilitation of concrete frames. In local rehabilitation, all FRP improved the both of loading capacity and ductility but carbon FRP compensated all lack of capacity that was imposed to the model. In global rehabilitation, all kinds of FRPs showed satisfying performance in improving capacity of concrete frames. At the end, local strengthening by carbon FRP was showed the best performance among the others and glass FRP was presented the optimum behavior in global strengthening.}, keywords = {Concrete Frame,Rehabilitation,Fiber Reinforced Polymer (FRP),Cyclic behavior,ABAQUS software}, title_fa = {ارزیابی عملکرد چرخه ای قاب های بتن مسلح مقاوم‌سازی شده با الگوهای مختلف FRP}, abstract_fa = {در این مقاله، عملکرد لرزه­ای قاب­های بتن‌آرمه تقویت‌شده موضعی و کلی با FRP، تحت بارهای چرخه­ای و پوش آور مورد بررسی قرار گرفت. به این منظور ابتدا یک قاب بتنی سه طبقه دو دهانه طراحی شده مطابق مبحث نهم مقرارت ملی ساختمان ایران با استفاده از نرم‌افزار اجزای محدود آباکوس مدل‌سازی شد. سپس با کاهش سایز آرماتورهای قاب بتنی، به‌نحوی‌که قاب در برابر بارهای ثقلی مقاوم و در برابر بارهای جانبی ضعیف باشد، قاب جدید ضعیف شده­ای مدل‌سازی شد. در نهایت قاب بهسازی شده­ای از تقویت قاب ضعیف با الیاف­های FRP کربن، آرامید، شیشه و به دو روش تقویت موضعی و کلی، مدل‌سازی شد. هر سه قاب تحت بارهای چرخه‌ای و پوش آور قرار گرفتند و نتایج حاصله حاکی از تأثیر بسیار خوب الیاف کربن در تقویت موضعی و تأثیر بسیار بالای کلیه الیاف‌ها در تقویت کلی قاب‌های بتن‌آرمه می‌باشد. علاوه بر این، تقویت موضعی شکل‌پذیری مناسب‌تری را در سیستم تقویت‌شده ایجاد می­کند. در بین الیاف­های مختلف، شیشه شکل‌پذیری بیشتری به سیستم می­دهد و کربن ظرفیت باربری را بیشتر افزایش می­دهد. آرامید نیز رفتاری بین کربن و شیشه دارد ولی بیشتر شبیه به کربن عمل می­کند. همچنین به‌طور کلی تقویت کلی بهینه نبوده و به‌جز در موارد خاص توصیه نمی­شود.}, keywords_fa = {قاب بتن‌آرمه,تقویت و بهسازی,الیاف پلیمری تقویت‌شده (FRP),رفتار چرخه‌ای,نرم افزار آباکوس}, url = {https://www.jnace.ir/article_125363.html}, eprint = {https://www.jnace.ir/article_125363_c9ae390b61bf7d9570bdb415d8d7176c.pdf} }