@article { author = {Rafie, Hamide and Ashgi, Masoumeh and Dabiri, Rouzbeh}, title = {Determination of Coefficient Behavior in Structures with Discontinuity in Shear Walls under Seismic Loading}, journal = {New Approaches in Civil Engineering}, volume = {2}, number = {3}, pages = {47-69}, year = {2018}, publisher = {Papyrus Press}, issn = {2588-7122}, eissn = {2588-7122}, doi = {10.30469/jnace.2018.80969}, abstract = {Based on experience of past earthquakes, irregularity in building is one of the major cause has been damages to structures. One of these irregularities is the discontinuity of vertical elements such as displacement of position of shear wall in height, considering that in design versus lateral forces, the forces applied to buildings should be transferred from the point of their effect through the whole system to the ground, and the path of forces must be completed. Where, there is an interruption in the normal transition of forces, problems have occurred. Weak story or torsion effects created in floor of building. In multi-story buildings, columns and shear walls must be positioned along each other. With considering the limitations of codes and architectural requirements, there is a question in minds of engineers that it is possible to violate this common rule and to design discontinued shear wall in height. Although, Iranian code No.2800 (Ver.4) warned against the design and use of buildings with discontinues shear wall and recommended these types of systems should not be applied. Therefore, in this research, the seismic behavior of irregular flexural concrete frames in terms of discontinuity in shear wall have been evaluated. Also, building coefficient of behavior, displacement control an irregularity effects in seismic behavior of frames have been considered. What is important in this research, moving the shear wall in which floor can have the least effect on structural response. In this study, models analyzed under nonlinearity statically condition     with using SAP 2000 program.}, keywords = {irregularity,Discontinuity,Shear wall,Behavior coefficient}, title_fa = {تعیین ضریب رفتار در سازه های دارای ناپیوستگی دیوار برشی تحت اثر بار لرزه ای}, abstract_fa = {باتوجه به تجارب گذشته از زمین لرزه ها، بی نظمی ساختمان یکی از علل اصلی خسارات سنگین وارده به سازه‌ها بوده است. یکی از این بی نظمی ها ناپیوستگی المان‌های سازه‌ای عمودی از جمله جابه‌جایی دیوار برشی در ارتفاع می‌باشد، با توجه به اینکه در طراحی در برابر نیروهای جانبی، نیروهای اعمال شده به ساختمان ها باید از نقطه اثر اصلی خود از طریق کل سیستم به زمین انتقال یابند، مسیر نیروها باید کامل باشد. جایی که وقفه در جریان طبیعی نیروها وجود دارد، مشکلات رخ داده و ممکن است یک طبقه را ضعیف کرده و یا ایجاد اثرات پیچشی نماید. در ساختمان های چند طبقه، ستون ها و دیوارهای برشی را باید در امتداد یکدیگر قرار گیرند. با توجه به محدویت های آیین نامه ای و الزامات معماری، این پرسش در ذهن مهندسین وجود دارد که آیا می توان از این قاعده رایج تخطی کرده و دیوارهای برشی را به صورت غیرپیوسته در ارتفاع طراحی و اجرا نمود. گرچه آیین نامه طراحی سازه ها در برابر زلزله ایران (استاندارد 2800) ، نسبت به طرح و کاربرد ساختمان های با دیوار برشی ناپیوسته هشدار داده و توصیه نموده که از این نوع سیستم های لرزه‌بر استفاده نشود. از این رو، در این تحقیق به بررسی رفتار لرزه ای قاب های بتنی خمشی نامنظم از نظر ناپیوستگی دیوار برشی بتنی با بررسی ضریب رفتار و کنترل تغییر مکان و تأثیر نامنظمی در رفتار لرزه ای قاب ها پرداخته شده است. آنچه در این تحقیق حائز اهمیت است این است که جابجایی موقعیت دیواربرشی در چه طبقه ای می تواند کمترین اثر را بر پاسخ سازه ای داشته باشد. مدل ها در نرم افزار SAP2000 به صورت غیر خطی مدلسازی شده و مورد تحلیل استاتیکی غیر خطی قرار گرفته اند.}, keywords_fa = {نامنظمی,ناپیوستگی,دیوار برشی,ضریب رفتار}, url = {https://www.jnace.ir/article_80969.html}, eprint = {https://www.jnace.ir/article_80969_7c318d0aab59b2196f725c3c79047267.pdf} }