Fiiling of Voids in Porous Concrete with using Earth Materials

Document Type : Research Paper

Authors

1 Professor, Faculty of Civil Engineering and Environment, Tarbiat Modares University, Road and Transportation Engineering Researches Center, Tehran, Iran

2 M.Sc. of Road and Transportation Engineering, Faculty of Civil Engineering and Environment, Tarbiat Modares University, Tehran, Iran

Abstract

Porous concrete is one of concrete with high voids generally is utilized in pavement. In field of maintenance and repair of this type of concrete there is not sufficient information and methodology. For protection of porous concrete as a best method in flood management, this type of pavement should be extended and blocked porous have to improve. In this research, voids in porous concrete is filled by materials such as soil, sand and volcanic sand. Until, with stable compressive strength permeability protected. Results of present study showed that overall with filling voids in porous concrete permeability decreased. When, voids filled by sand, maximum horizontal permeability with 0.38 cm/sec value is made. In contrast, while voids filled by volcanic sand, maximum vertical permeability with 0.33 cm/sec is created. In the other side, maximum compressive strength in specimen with volcanic sand with 5.71 MPa observed. Therefore, it can be explained that, porous concrete useable in shoulder of road, parking, parks and roads with low traffic volume.

Keywords

Main Subjects

References

[1]-رمضانیانپور، ا، طاهری، م.، 1396، ارزیابی آزمایشگاهی اثر پودر ضایعاتی زغال سنگ بر خصوصیات فیزیکی و مکانیکی روسازی بتنی متخلخل،  دومین کنفرانس ملی رویه های بتنی، تهران، 6 و 7 اردیبهشت.
[2]- شفابخش، غ.، احمدی، س.، 1396، ارزیابی ویژگیهای بتن متخلخل به عنوان رویه در روسازیهای بتنی، دومین کنفرانس ملی رویه های بتنی، تهران، 6 و 7 اردیبهشت.
[3]- تیموری،ا.،کرمی، ح.، 1395، عملکرد بتن متخلخل حاوی افزودنی جهت کاهش سیلاب شهری، فصلنامه آنالیز سازه -زلزله، دوره1، شماره1، بهار، ص 4-15. 
[4]- Sarwono, D., Djamari, R., and Setyawan, A., 2017, The application of porous concrete filled with soil and sands for low volume traffic roud, Journal of Sastainable civil Engineering Structures and Construction Materials, SCESCM, 171(10), 1429-1434.  
[5]-عطایی، ا،گلرو،ا. ،جوشقانی،ا.،1395، ارزیابی میزان تاثیر اندازه سنگدانه بر خصوصیات مکانیکی و فیزیکی روسازی بتن متخلخل، مهندسی حمل و نقل، سال هشتم، شماره1، پاییز، ص 110-123.
[6]- Weiss, P. T., Kayhanian, M., Gulliver, J. S., Khazanovich, L., 2017, Permeable pavement in northern North American urban areas, Journal of Pavment Engineering, 1-20.
[7]- Lin, W, Park, D. G. and Ryu, S. W., 2016, Development of permeability test method for porous concrete block pavement materials considering clogging, Journal Construction and Building Materials, 118(20): 20-26.
[8]- Yong, C. F., McCarthy, D. T. and Deletic, A., 2013, Predicting physical clogging of porous and permeable pavements. Journal of Hydrology, 481(20), 48-55.
[9]-Kayhanian, M., Anderson, D., Harvey, J. T., Jones, D., Muhunthan, B., 2012, Permeability measurement and scan imaging to assess clogging of pervious concrete pavements in parking lots, Journal of Environment  Management, 95,114–123.
[10]- Lian, C., Zhuge, Y. and Beecham, R., 2011, The relationship between porosity and strength for porous concrete, Journal of Construction and Building Materials,; 25(19): 4292-4298.
New Approaches in Civil Engineering
Volume 3, Issue 1
June 2019
Pages 46-56

Files

Share

How to cite

Statistics