1-American Concrete Institute Committee, (1995). Ground Granulated Blast-Furnace Slag as a Cementitious Constituent in Concrete, American Concrete Institute, Detroit, USA, ACI 95 – 233.
2-American Concrete Institute Committe 226, (1987). Silica Fume in Concrete, American Concrete Institute Material Journal, 84: 158-166.
3-Ahmaruzzaman, M., (2010). A Review on the Utilization of Fly Ash, Progress in Energy and Combustion Science 36: 327–363.
4-Alasali M.M. and Malhotra V.M. (1991). Role of concrete incorporating high volumes of fly ash in controlling expansion due to alkali-aggregate reaction.
5-American Concrete Institute Material 88: 63 - 159.
6- Aldea, C.M., Young, F., Wang, K. and Shah, S.P. (2000). Effects of curing conditions on properties of concrete using slag replacement, Cement and Concrete Research, 30: 465-472.
7-Anonim, (2007). USGBC, LEED rating system, version 3.0, US Green Building Council, Washington.
8- ASTM C 618, (2000). Standard Specification for Coal Fly Ashand Rawor Calcined Natural Pozzolan for Use as a Mineral Admixture in Concrete, Annual Book of ASTM Standard, No. 04.02.
9-Austin, S.A. and Al-Kindy, A.A. (2000). Air Permeability Versus Sorptivity: Effects of Field Curing on Cover Concrete After One Year Old Field Exposure, Magazine of Concrete Research, 52: 17-24.
10-Barker D., Turner S., Napier-Moore P., Clark M. and Davison J. (2009). CO2 capture in the cement industry, Energy Procedia, 1: 87–94.
11-Bayasi, Z., and Zhou, J. (1993). Properties of Silica Fume Concrete and Mortar, American Concrete Institute Materials Journal, 90: 349-356.
12-Belkowitz J., and Armentrout D.L. (2009). The investigation of nano-silica in the cement hydration process.
13-American Concrete Institute Special Publication, 267: 87-100.
14- Bentur, A., Bonen, D. and Goldman, A. (1993). Discussion of a Paper by Chong, X.. at all. Roll of Silica Fume in Compressive Strength of Cement Paste, Mortar and Concrete.
14-American Concrete Institute Material Journal, 376.
15- Bicer A. (2018). Effect of fly ash particle size on thermal and mechanical properties of fly ash-cement composites, Thermal Science and Engineering Progress, 8: 78–82.
16-Brooks, J. J., Joharı, M. A. M. and Mazloom, M. (2000). Effect of admixtures on the setting times of high-strength concrete. Cement and Concrete Composites, 22: 293– 301
